Warmer, Blanket And Fluid - Medline

Pedigo Combo Fluid/Blanket Warmer Cabinets UL, CSA and FDA approved. (Note: use of other types of fluids or products is not covered under the FDA approval of these units.) Individual temperature controls for irrigation and injection fluids allow for precise temperature settings for proper fluid tpe. 4 digit LED display, safety alarm warns if temperature exceeds set-point. Stainless steel. 125 VAC. Ships freight. Pedigo WarmWatch option features include a continuous temperature monitoring system that provides visual confirmation of the chamber temperature. An independent monitoring probe located very close to the control probe verifies that the chamber reaches and maintains the set-point temperature. Two independent LED displays on the control panel show the set-point and actual interior temperature at a glance.* This system provides digital documentation of the warmer's historical temperature performance data. Also offering significant advantages over manually recording temperature set-point or control probe displays. The independent monitoring probe in this option ensures that the actual chamber temperature is recorded. Automatic collection also ensures consistent data samples. The data can be downloaded to a USB flash drive and then to a computer at any desired time interval - up to six months between downloads. * The chambers are designed not to exceed the set-point temperature, thus the nominal actual temperature will always be 1 to 1-1/2 degrees lower than the set-point temperature.